Blister foil has been an important type of pharmaceutical packaging. Aluminum foil packaging can control the dose, which is convenient to be taken by the common people. Since medicines have strict temperature and humidity requirements and are easily broken, aluminum foil blister can be protected from unfavorable factors during long-distance transportation and long-term storage. Aluminum foil blister can be used for the packaging of tablets and capsules.
The pharmaceutical packaging aluminum foil is made of 8011 aluminum foil, and the tempers are H18 and O. Haomei medicine aluminum foil is made of electrolytic aluminum with a purity of more than 99% by rolling. It is non-toxic and tasteless, has excellent electrical conductivity and shading properties, and has extremely high moisture resistance, gas barrier properties and taste retention. How do we ensure the product quality?
Billet quality
As the raw material in the production of aluminum foil, the micro structure, alloying elements and surface quality of the billet will directly affect the structure and performance of the final product. The thinner the aluminum foil, the more significant the effect of the blank.
Purity
Most light gauge aluminum foils are made of 99.0%-99.5% industrial pure aluminum. In general, the higher the purity, the lower the tensile strength and the greater the elongation. The higher the purity, the more difficult it is to produce. At the same time, the extremely low purity will also bring control difficulty.
Impurities
Industrial pure aluminum is generally rich in impurities such as Fe, Si, Cu, Mn, Ti, B, C, etc. Some impurities are inherent in the original, while some are intentionally added, such as the addition of refiners such as Ti, B, etc. Although the content of these impurities is relatively small, they have a very important impact on the mechanical properties and processing performance of the product.
Plate Control
The most important aspect of aluminum foil rolling is shape control. Because the aluminum foil is very thin, if the plate shape is not good, the tension cannot be uniformly applied to the width direction during rolling, causing strip breakage, folding or wrinkling of the aluminum foil. Welcome to leave message below to inquire the alloy 8011 specifications.